Product Information:
Our thin wall Cross linked Polyolefin Heatshrink is designed for commercial use.
Common uses include insulation, wire bundling, colour coding and mechanical protection.
Available in a range of colours and sizes, all cut to metre as required.
Full coil / maximum continuous length: 100m.
Specification:
Colour: Grey.
Shrink Ratio: 2:1 Minimum.
Shrink Temperature: +90°C to start shrinking.
Temperature Rating: -55°C to +135°C continuous operating temperature.
Resistances: Resistant to common fluids and solvents. Tested against fungus with no growth occurring.
Approved to: UL 224 VW-1; MIL-I-23053/5 Class 1 & 3.
Dielectric Strength: Minimum 19.7kV/mm. Tested to ASTM D-2671
Volume Resistivity: Min 10¹³Ohm-cm. Tested to ASTM D-876
